Preparing for a job
Operation Instructions Rockhopper Printer
Page
45
AP-75024 Rev. 1.2. – 18/08/2002
Note:
•
Do not drop the media roll over the scroller as this might damage the
scroller end caps.
•
All Mutoh recommended roll media are rolled up with the printable
side facing the outside, so that you can load the roll media easily.
•
When the cut sheet indicator light is ON when loading a roll, the
printer will display a media search error after feeding the media for
about 3m.
Step 6: Installing the scroller slip ring
Install the scroller slip ring onto the scroller. Slide the scroller slip ring on the left side of
the scroller (side with fixed flange).
Step 7: Installing the scroller
Install the scroller as follows:
a) Stand at the back side of the printer, holding the scroller with the fixed flange side in
your left hand.
b) Slide the scroller (left side) into the scroller receiver, as shown in the illustration.
c) Push the scroller (Right side - movable flange side) down into the right scroller receiver.
You will notice it dropping nicely into place.
Step 8: Locking the scroller slip ring
Lock the scroller by sliding the scroller slip ring onto the scroller rollers. The scroller slip
ring will prevent unwinding of the roll media from the scroller when roll media is still not
loaded in the machine.