Preparing for a job
Operation Instructions Rockhopper Printer
Page
57
AP-75024 Rev. 1.2. – 18/08/2002
* Menu * Command >
Step 3 :
Press the
[ENTER]
key to confirm the
“Command” menu and shift to the next
level.
OriginReset : No
Step 4 :
Bring up the “OriginReset” item by pressing
the
[Menu up]
key or
[Menu Down]
key.
OriginReset : Yes
Step 5 :
Press the
[Value/+]
or
[Value/-]
key to
select “Yes” or “No”.
Origin : Init
Step 7 :
Press the
[Value/+]
or
[Value/-]
key to
select “new origin” or “Initialisation”.
Origin : New>
Step 8 :
To select a new origin select “New>” and
press the
[ENTER]
key to confirm.
Offset : 0
Step 9 :
Set a new origin (0 to media width minus 20
mm) and press the
[ENTER]
key to confirm.
* Menu * Command >
Step 10 :
Do not press any other keys for 3 minutes
or press
[BACK]
key
Plot OK
Step 11 :
The permanent ONLINE-status display is
restored.
Note :
Once set, the Origin-Reset function will remain set until it is reset to zero
or until it is changed by the user.