Installation Procedures
Operation Instructions Rockhopper Printer
Page
25
AP-75024 Rev. 1.2. – 18/08/2002
Step 3 :
Hook the right end plate between the leg assembly. To do so, follow the same procedure
as for the left end plate.
Hook the right end plate between the leg assembly. Turn the right end plate diagonally, so
that you can put it in-between the right leg and then turn it right to fix it into place by means
of the hooks.
Fasten the right end plate temporarily with 2 bolts + washers (use a 3 mm hex key) onto
the bracket.
Push the endplate as much as possible to the upper side of the leg assembly, so you can
easily screw the printer body onto the stand.