Mitsubishi 3000GT 1991, Service Manual

Page: 392 / 1146

MANUAL TRANSAXLE
Transaxle Control
INSPECTION
l
Check the transaxle control cable assembly for function and
for damage.
l
Check the boot for damage.
l
Check each bushing for wear or abrasion, sticking, impeded
action, and damage.
Lever B
End of select cable
er B
Neutral position
POINTS OF INSTALLATION
3. CONNECTION OF TRANSAXLE CONTROL CABLE
ASSEMBLY (SHIFT LEVER ASSEMBLY SIDE)
Move the transaxle shift lever to the neutral position.
NOTE
The select lever will be set to the neutral position when
the transaxle shift lever is moved to the neutral position.
(2) With the shift lever on the passenger compartment side
in the neutral position, turn adjuster on select cable so
that select cable end is positioned as shown with
reference to lever B of shift lever.
(3) Install the select cable so that the flange side of the
plastic bushing at the end of select cable is on the end
face side of lever B.
(4) Turn adjuster on shift cable so that shift cable end is
positioned as shown with reference to shift lever on the
passenger compartment side.
(5) Install the shift cable so that the flange side of the
plastic bushing at the end of shift cable is on the split
pin side.
Connect the shift cable, then turn adjuster on shift cable
so that dimension A equals dimension B.
(7) Move the shift lever to each position and check that the
shifting is smooth.
TSB Revision