Mitsubishi 3000GT 1991, Service Manual

Page: 1060 / 1146

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Front upper frame lower
Front Impact Sensors
(1)
Remove right and left front splash shield extensions.
Check sensors to ensure the arrow marks face the front
of the vehicle.
Check front upper frame lowers and sensor brackets for
deformities or rust.
Caution
The SRS may not activate properly if a front impact
sensor is not installed properly, which could result
in serious injury or death to the vehicles driver.
(3) Check wiring harness (for front impact sensor) for
binds, connector for damage, and terminals for deformi-
ties.
Replace sensor and/or wiring harness if it fails visual
check. (Refer to
and
SRS Diagnosis Unit (SDU)
2 - 2
Check SDU case and brackets for dents, cracks,
deformities or rust.
Caution
The SRS may not activate properly if SRS diagnosis
unit is not installed properly, which could result in
serious injury or death to the vehicle’s driver.
(2) Check connectors and lock lever for damage, and
terminals for deformities or rust.
Replace SDU if it fails visual check. (Refer to
i
TSB Revision