Mitsubishi 3000GT 1991, Service Manual

Page: 725 / 1146

SERVICE BRAKES Specifications
SPECIFICATIONS
FWD
AWD
andard value
Brake pedal height mm (in.)
177 182 (7.0 7.2)
177 182 (7.0 7.2)
Brake pedal free play mm (in.)
Brake pedal to floorboard clearance
mm (in.)
80 (3.1) or more
80 (3.1) or more
Pad thickness mm (in.)
Front disc thickness mm (in.)
24.0
30.0 (1.18)
Rear disc thickness
mm (in.) 18.0
20.0
Proportioning valve pressure
(psi)
Split point
3.75 4.25 (533 604)
3.75 4.25 (533 604)
Output pressure [input pressure]
5.23 5.73 (744 815) 5.23 5.73 815)
Booster cylinder piston
clearance
7 8 inch brake booster
0.55 0.75
8 9 inch brake booster
0.65 0.85 0.65 0.85
Disc brake drag force (tangential force of
wheel mounting bolts) N 70 (15.4) or less
70 (15.4) or less
[Disc brake dragging torque
(3) or less] (3) or less]
Speed sensor’s (ABS) internal resistance
Front
1 . 4 - 2 . 2 0.8 1.2
Rear 1.3-2.1
1.2
Rear speed sensor pole piece-to-rotor
tooth surface clearance mm (in.)
-1.12)
Clearance between the piece
and the toothed rotor
Front 0.3 0.9 ,035)
Rear 0.2 0.7
nit
Left/right proportioning valve output
pressure difference
(psi) 0.4 (57) 0.4 (57)
Front disc run-out mm (in.) 0.1 or less
0.1 or less
Pad thickness mm (in.) 2.0 2.0
Front disc thickness mm (in.)
22.4 28.4 (1.12)
Front hub end play
mm (in.)
0.05 0.05
Rear disc thickness
mm (in.)
16.4 18.4
Rear disc run-out mm (in.) 0.08 or less 0.08 or less
Rear hub end play mm (in.) 0.05
0.8
TSB Revision