Mitsubishi 3000GT 1991, Service Manual

Page: 734 / 1146

SERVICE BRAKES
METHOD OF CLEARING DIAGNOSIS ACTUATOR TEST FUNCTION
CODE MEMORY
The actuator can be forcibly driven in the following
Caution
way by using the MUT.
l
When servicing is finished, clear the
c o d e m e m o r y .
NOTE
l
The actuator test cannot be carried out when the
Trouble codes cannot be cleared from memory
ABS ECU system is in fail safe.
when the ABS ECU system is in fail safe. Proceed to
l
When using forced drive using the MUT, the
diagnosis and repair.
vehicle must be stopped.
(1) Clear memory using MUT.
l
During forced drive using the MUT, forced drive
(No. 7 ERASE” in the actuator test is
operation is stopped when any wheel speed
selected to erase the diaanosis code.)
reaches km/h (6 mph).
(2) After clearing, recheck the diagnosis codes, and
check that memory is cleared.
Actuator test specifications
No.
MUT display
01
VALVE A
02
FL VALVE A
0 3
REAR VALVE A
0 4
VALVE M
0 5
FL VALVE M
0 6
REAR VALVE M
Drive solenoid
valve and motor
Drive pattern
Not used
Solenoid valve and
pump motor for
each HU
ponding channel.
<Manual pattern>
Start of forced drive
End of forced
TSB Revision