Mitsubishi 3000GT 1991, Service Manual

Page: 1074 / 1146

Air Module
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
and Clock
Connector
Air
module
(3) Remove the red connector of the clock spring
from the SRS diagnosis unit while pressing down the
lock of the clock spring’s connector. (Refer to
INSPECTION
AIR BAG MODULE
Caution
Never attempt to measure the circuit resistance of the air
bag module (squib) even if you are using the specified
tester. If the circuit resistance is measured with a tester,
accidental air bag deployment will result in serious person-
al injury.
Check pad cover for dents, cracks or deformities.
Check the air bag module for denting, cracking or deforma-
tion.
Check hooks and connectors for damage, terminals for
deformities, and harness for binds.
Check air bag inflator case for dents, cracks or deformities.
TSB Revision
(5) Install the air bag module to steering wheel to check fit or
alignment with the wheel.
Caution
If a dent, crack or other deformation is discovered,
replace the air bag module with a new one.
Dispose of the old one according to the specified
procedure. (Refer to
to