Mitsubishi 3000GT 1991, Service Manual

Page: 543 / 1146

AUTOMATIC TRANSAXLE
Transaxle Assembly
23-91
pulse generator A and B.
Caution
Install the black tube to the output gear side and
transparent tube to end clutch side.
(73)Mount the oil filler tube and insert the level gauge.
the brackets.
(75)Adjust the servo.
the servo switch and secure it with the
snap ring.
ATF to the oil pump drive hub, install the torque
converter, and push converter into position so that dimen-
sion A is up to specification.
Standard value: Approx. 16.3 mm in.)
COMPONENT DISASSEMBLY/REASSEMBLY
PRECAUTIONS
GENERAL CLEANING PRECAUTIONS
(1) Clean parts and blow the oil passages and oil holes with
compressed air to check that they are not clogged.
(2) For the cleaning solution, use the specified ATF or
kerosene.
(3) When drying parts with compressed air, use care not to
allow ATF or kerosene to splash over your face.
PARTS HANDLING PRECAUTIONS
Keep parts after cleaning in good order to ensure correct
inspection, repair, and reinstallation.
(2) When disassembling the valve body, keep each valve with
the mating spring.
(3) Keep the new brake disc and clutch disc for replacement
dipped in ATF for more than two hours.
TSB
Revision