Mitsubishi 3000GT 1991, Service Manual

Page: 934 / 1146

BODY Central Door Locking System
REMOVAL AND INSTALLATION
Door lock actuator removal
Door trim and waterproof film (Refer to
latch assembly (Refer to
Door lock actuator
Door lock switch removal
Door trim (Refer to
2. Door lock switch
<Driver’s side>
<Passenger’s side>
view
A
INSPECTION
DOOR LOCK ACTUATOR
(1) Place the rod in the LOCK position, apply the battery power
to the terminal for driver’s side or (1) for passenger’s
and check to see that when the terminal for
driver’s side or (3) for passenger’s side] is grounded, the rod
moves to the UNLOCK position.
(2) Then place the rod in the UNLOCK position, apply the
battery power to the terminal [(I) for driver’s side or (3) for
passenger’s side], and check to see that when the terminal
for driver’s side or (1) for passenger’s side] is grounded,
the rod moves to the LOCK position.
(3) Check to ensure that when the rod is placed in the UNLOCK
position, there is acontinuity between the terminals (2) and
(4). and that when the rod is placed in the LOCK position,
there is no continuity.
TSB Revision