Mitsubishi 3000GT 1991, Service Manual

Page: 438 / 1146

22-58
MANUAL TRANSAXLE
Transaxle Assembly
SERVICE POINTS OF REMOVAL
11. REMOVAL OF CLUTCH RELEASE CYLINDER 12.
CONNECTION OF TRANSAXLE MOUNT
Refer to
18. DISCONNECTION OF TIE ROD END 19. LOWER ARM
BALL JOINT
Refer to
23. REMOVAL OF DRIVE SHAFT (LEFT SIDE), INNER SHAFT
ASSEMBLY 24. DRIVE SHAFT (RIGHT SIDE) 27.
TRANSAXLE ASSEMBLY LOWER COUPLING BOLT 28.
TRANSAXLE ASSEMBLY
Refer to
SERVICE POINTS OF INSTALLATION
24. INSTALLATION OF DRIVE SHAFT (RIGHT SIDE) 15.
MOUNTING STOPPER
Refer to
03FOOE
Air intake hose B
Air hose A
Air hose C
4. INSTALLATION OF VACUUM PIPE
If the vacuum pipe has a stepped part, connect the vacuum
hose to the pipe securely, up to the stepped part, as shown
in the figure.
3. INSTALLATION OF AIR CLEANER COVER, AIR INTAKE
HOSE A
Align slots indicated by arrows in air intake hose A with
markings on air intake hoses B and C; then, insert hoses B
and C all the way into air intake hose A.
Insert air intake hoses B and C all the way up to the roots on
the turbocharger end.
2. INSTALLATION OF AIR HOSE A
Connect the air hoses ensuring that alignment marks are
aligned with projections.
Insert air hoses B and C into pipe all the way to its step.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the intercooler itself.
TSB Revision
1