Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 466 / 501

Replacement of lamp bulbs
Maintenance 10-33
10
3. Turn the socket anticlockwise to remove
it.
4. While holding down the tab (F), pull out
the bulb (G).
5. To install the bulb, perform the removal
steps in reverse.
E01004202800
1. Open the tail gate.
2. Remove the screw (A), and then move the
reflector or rear fog lamp towards the rear
of the vehicle to unfix the clip (B) of the
reflector or rear fog lamp.
3. Remove the screws (C), and then move
the lamp unit towards the rear of the vehi-
cle to unfix the notch (D) and pins (E) of
the lamp unit.
4. Remove each socket and bulb assembly
by turning it anticlockwise.
NOTE
 When unfastening the screws of the fog
lamp, be careful not to mistakenly move the
beam position adjustment screw (C).
D- Front fog lamp
E- Daytime running lamp
Type 3 Type 2 Type 1
Rear combination lamps
Front fog lamp Daytime running lamp
F- Tail and stop lamp (bulb type)*
Remove the bulb from the socket by
turning it anticlockwise while pressing
in.
BK0240501EN.book 33 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分