Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 63 / 501

Head restraints
4-8 Seat and seat belts
4
Lift the head restraint with the height adjust-
ing knob (A) pressed in.
Confirm that the head restraint is facing the
correct direction, and then insert it into the
seatback while pressing the height adjusting
knob (A) in the direction indicated by the
arrow.
The head restraint stalk with the adjustment
notches (B) must be installed in the hole with
the adjusting knob (A).
WARNING
 When a person sits in the second or the
third seats (7 persons), pull up the head
restraint to a height at which it locks in
position. Be sure to make this adjustment
before starting to drive. Serious injuries
could otherwise be suffered in the result of
an impact.
To remove
Second seats
Third seats
(7 persons)
To install
CAUTION
 Confirm that the height adjusting knob (A) is
correctly adjusted as shown in the illustra-
tion, and also lift the head restraints to
ensure that they do not come out of the seat-
back.
CAUTION
 The shape and size of the head restraint dif-
fers according to the seat. Always use the
correct head restraint provided for the seat
and do not install the head restraint in the
wrong direction.
BK0240501EN.book 8 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分