Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 254 / 501

Cruise control*
Starting and driving 6-87
6
Indicator display
2. Accelerate or decelerate to your desired
speed, then push down and release the
SET - switch (B) when the indicator
lamp/indicator display is illuminated. The
vehicle will then maintain the desired
speed. The “SET” indicator appears on
the information display in the meter clus-
ter. (For vehicles equipped with color liq-
uid crystal display meter)
E00609401841
There are 2 ways to increase the set speed.
Push up and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To increase your speed in small amounts,
push up the RES + switch (C) for less than
approximately 1 second and release it.
Each time you push up the RES + switch (C),
your vehicle will go approximately 1
mph
faster.
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the SET - switch (B) and
release the switch momentarily to set a new
desired cruising speed.
E00609501783
There are 2 ways to decrease the set speed.
Push down and hold the SET - switch (B)
while driving at the set speed, and your speed
will slow down gradually.
NOTE
 When you release the SET - switch (B), the
vehicle speed will be set.
To increase the set speed
RES + switch
Accelerator pedal
To decrease the set speed
SET - switch
BK0240501EN.book 87 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分