Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 417 / 501

How to change a tyre
8-10 For emergencies
8
4. Turn the securing bolt (D) anticlockwise
with the wheel nut wrench to lower the
spare wheel completely to the ground and
to slack the chain.
5. Remove the hanger disc (E) from the
spare wheel.
E00803202468
1. Loosen the wheel nuts a quarter turn with
the wheel nut wrench. Do not remove the
wheel nuts yet.
2. Place the jack under one of the jacking
points shown in the illustration. Use the
jacking point closest to the tyre you wish
to change.
CAUTION
 When removing the spare wheel, please
observe the following points.
If you do not follow them, it could result in
breakage of the spare wheel carrier.
• Do not use the power tool. Use the wheel
nut wrench stowed on the vehicle.
• Do not apply a force of 200 N or more at
the end of the wheel nut wrench.
NOTE
 Put the spare wheel under the vehicle body
near the flat tyre. This makes it safer if the
jack slips out of position.
CAUTION
To change a tyre
BK0240501EN.book 10 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分