Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 122 / 501

Multi information display - Type 2
Instruments and controls 5-25
5
• When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display is
automatically reset.
[Except for vehicles equipped with the
keyless operation system]
The ignition switch is in the “ACC” or
“LOCK” position for approximately
4 hours or longer.
[For vehicles equipped with the keyless
operation system]
The operation mode is in ACC or OFF
for approximately 4 hours or longer.
E00523001853
The display unit for fuel consumption can be
switched. The distance and amount units are
also switched to match the selected fuel con-
sumption unit.
1. When you lightly press the multi informa-
tion display switch a few times, the infor-
mation display switches to the average
fuel consumption display.
Refer to “Information display” on page
5-19.
2. Press and hold the multi information dis-
play switch for approximately 5 seconds
or more until buzzer sound is heard twice.
3. Press and hold the multi information dis-
play switch to switch in sequence from
“km/L”

“L/100 km”

“mpg”

“km/L”.
The distance units is also switched in the fol-
lowing combinations to match the selected
fuel consumption unit.
E00523101753
The display unit for outside temperature can
be switched.
1. When you lightly press the multi informa-
tion display switch a few times, the infor-
mation display switches to the outside
temperature display.
NOTE

The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
 The memory of the manual reset mode or
auto reset mode for the average fuel con-
sumption display is erased if the battery is
disconnected.

The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption
display unit
NOTE
 The display units for the driving range, the
average fuel consumption are switched, but
the units for the indicating needle (speedom-
eter), the odometer, the tripmeter and the ser-
vice reminder will remain unchanged.

The memory of the unit setting is erased if
the battery is disconnected, and it returns
automatically to factory setting.
Fuel consumption
Distance
(driving range)
km/L km
L/100 km km
mpg mile (s)
Changing the temperature unit
BK0240501EN.book 25 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分