Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 223 / 501

Super select 4WD II*
6-56 Starting and driving
6
E00651200043
When the operation mode is put in ON, drive
mode indicator display and 2WD/4WD oper-
ation indicator display shows the shifting
condition. The drive mode indicator display
and 2WD/4WD operation indicator display
comes on at each drive mode-selector posi-
tion as follows:
 On vehicles with the active stability & trac-
tion control (ASTC), the active stability con-
trol function is suspended while “4LLc” is
selected. indicator lamp is illuminated
while these functions are suspended. It does
not indicate a problem. When “2H” or “4H”
or “4HLc” is selected, this lamp goes out and
function again. Refer to “ASTC indicator
lamp or ASTC OFF indicator lamp” on page
6-84.
NOTE CAUTION
 If a problem is detected in the transfer sys-
tem, a safety device will activate. The front
and rear wheel lamps will go out, the centre
differential lock lamp will blink rapidly
(twice per second), and transfer shifting will
become impossible. Park your vehicle in a
safe place, turn off the engine for a few
moments. Restart the engine. The lamp
should resume normal operation. If the
lamps continue to blink, have the vehicle
checked by an authorised MITSUBISHI
MOTORS dealer as soon as possible.
Drive mode indicator display and
2WD/4WD operation indicator
display
A: Drive mode indicator display
B: Front wheel indicator display
C: Centre differential lock indicator dis-
play
D: Rear wheel indicator display
E: Low-range indicator display
BK0240501EN.book 56 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分