Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 72 / 501

Seat belts
Seat and seat belts 4-17
4
E00405101200
The lap belts should be adjusted by holding
the belt and latch plate at right angles to each
other, and then pulling the belt as shown in
the illustration to a snug fit around the occu-
pant.
While holding the latch plate, insert the latch
plate into the buckle until a “click” is heard.
E00412701064
The second-centre 3-point type seat belt must
be worn correctly as illustrated.
1. Pull out the latch plate (B) and then pull
out the small latch plate (A) by tilting it as
shown in the illustration.
WARNING
 When adjusting the seat belt anchor, set it
at a position that is sufficiently high so
that the belt will make full contact with
your shoulder but will not touch your
neck.
Lap belts
*
1- Tighten
2- Loosen
Second-centre 3-point type seat
belt*
WARNING
 Be sure to securely connect the both latch
plate (A and B). Failing to do so could sig-
nificantly reduce the amount of protection
and cause serious injures in a collision or a
sudden stop.
To fasten
BK0240501EN.book 17 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分