Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 107 / 501

Multi information display - Type 1
5-10 Instruments and controls
5
2. Press and hold the multi information dis-
play switch for approximately 2 seconds
or more to display “ ” and make it flash.
(If there is no operation for approximately
10 seconds with flashing, the display
returns to the previous screen.)
3. Lightly press the multi information dis-
play switch while the icon is flashing to
change the display from “---” to
“CLEAR”. After this, the time until the
next periodic inspection will be displayed.
E00531001126
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the system check screen is displayed for
approximately 4 seconds. If there is no fault,
information screen (when the ignition switch
or the operation mode is ON) is displayed.
If there is a fault, the screen changes to warn-
ing display.
Refer to “Warning display list” on page 5-28.
E00538001095
This displays the approximate driving range
(how many more kilometres or miles you can
drive). When the driving range falls below
approximately 50 km (30 miles), “---” is dis-
played.
Refuel as soon as possible.
CAUTION
 The customer is responsible for making sure
that periodic inspection and maintenance are
performed.
Inspections and maintenance must be per-
formed to prevent accidents and malfunc-
tions.
NOTE
 “---” display cannot be reset when the igni-
tion switch or the operation mode is in ON.
 When “---” is displayed, after a certain dis-
tance and a certain period of time, the dis-
play is reset and the time until the next
periodic inspection is displayed.
 If you accidentally reset the display, we rec-
ommend you to consult an authorised
MITSUBISHI MOTORS dealer.
System check screen
NOTE
 The system check screen display varies
depending on the customer’s equipment.
Driving range display
BK0240501EN.book 10 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分