Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 142 / 501

Indicator lamp, warning lamp, and information screen display list (multi information display - Type 1)
Instruments and controls 5-45
5
 The Blind Spot Warning (BSW) sensor is
temporarily not available for some reason
such as the environmental condition or
increase of the sensor temperature.  When the warning display does not disap-
pear after waiting for a while, contact an
authorised MITSUBISHI MOTORS
dealer.
Refer to “When the sensor is temporarily
not available” on page 6-117.

The Blind Spot Warning (BSW) does not
operate normally because there are some
malfunctions in the sensor or the system.

Immediately have your vehicle inspected at
an authorised MITSUBISHI MOTORS
dealer.
Refer to “When there is a malfunction in
the system or the sensor” on page 6-117.

The tyre pressure in one of the tyres is
low.
Not UK Spec
Refer to “Tyre pressure monitoring system
warning lamp/display” on page 6-118.

There is a fault in the tyre pressure moni-
toring system.
Not UK Spec
Refer to “Tyre pressure monitoring system
warning lamp/display” on page 6-118.

The engine is overheated.

Stop the vehicle in a safe place and take
corrective measures.
Refer to “Engine overheating” on page 8-4.
Screen Cause Solution (Reference)
BK0240501EN.book 45 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分