Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 103 / 501

Multi information display - Type 1
5-6 Instruments and controls
5
E00522001944
When there is information to be announced,
such as a system fault, the buzzer sounds and
the information screen is switched to the
warning display screen.
Refer to the warning list and take the neces-
sary measures.
Refer to “Warning display list” on page 5-28.
When the cause of the warning display is
eliminated, the warning display goes out
automatically.
Even if the cause of the warning display is
not eliminated, you can return to the screen
that was displayed before the warning dis-
play.
If you press the multi information display
switch, the display screen switches to the
screen that was displayed before the warning
display and the mark (A) is displayed.
Warning display screens with a “ ” or “ ”
mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi information dis-
play switch as follows.
“ ”: Press lightly.
“ ”: Press for approximately 2 seconds or
more.
When the mark is displayed, if you lightly
press the multi information display switch a
few times, the warning display screen you
switched from is redisplayed.
The operation status of each system is dis-
played on the information screen.
Refer to the appropriate page in the warning
display list for further details.
Refer to “Other interrupt displays” on page
5-46.
E00533901060
This is displayed when you press the multi
information display switch and return from
the warning display screen to the previous
screen.
This mark is also displayed if there is another
warning other than the one displayed.
 While driving, the function setting screen is
not displayed even if you operate the multi
information display switch.
Always stop the vehicle in a safe place
before operating and firmly apply the park-
ing brake and put the gearshift lever into the
“N” (Neutral) position (M/T) or the selector
lever into the “P” (PARK) position (A/T).
Refer to “Changing the function settings” on
page 5-13.

When there is information to be announced,
such as a system fault, the buzzer sounds and
the screen display is switched.
Refer to “Interrupt display screen” on page
5-6.
Interrupt display screen
Warning display
NOTE
To return to the screen displayed before
the warning display
If you want to switch the display
Redisplay of a warning display
screen
Other interrupt displays
mark display
BK0240501EN.book 6 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分