Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 330 / 501

Customising the air conditioning
For pleasant driving 7-21
7
E00774400030
When the switch is pressed, the fan starts and
the indicator lamp (A) comes on. When the
switch is pressed again, the fan stops and the
indicator lamp goes off.
E00774500031
1. Press the “ON/OFF” switch to activate the
rear cooler.
2. Press the “UP” button to increase the
blower speed and press the “DOWN” but-
ton to decrease the blower speed. The
selected blower speed will be shown with
the indicator lamp (A).
3. Press the “ON/OFF” switch again to stop
operation.
E00774600061
For vehicle with the automatic climate con-
trol air conditioner/dual-zone automatic cli-
mate control air conditioner, the following
customise functions can be applied.
E00774700046
Functions can be changed as desired, as
stated below.
 Enable automatic air conditioning control
When the AUTO switch is pressed, or the
temperature control switch is set to the
minimum temperature, the air condition-
ing switch is controlled automatically.

Disable automatic air conditioning control
The air conditioning switch is not con-
trolled automatically as long as the air
conditioning switch is not operated.
 Setting change method
Hold down the air conditioning switch for
approximately 10 seconds or more.
• When the setting is changed from enable
to disable
To operate the rear cooler in the
front seat
Type 1
Type 2
To operate the rear cooler in the
rear seat
NOTE
 If the rear cooler is activated again after it is
stopped by pressing the “ON/OFF” switch or
after the engine is stopped, the blower speed
will return to the previous setting.
Customising the air condi-
tioning
Customising the air condition-
ing switch
BK0240501EN.book 21 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分