Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 376 / 501

Bluetooth® 2.0 interface*
For pleasant driving 7-67
7
matically connected to the Bluetooth
®
2.0
interface.
You can also change a Bluetooth
®
device to
be connected.
To pair a Bluetooth
®
device with the Blue-
tooth
®
2.0 interface, follow the steps below.
1. Stop your vehicle in a safe area, put the
gearshift lever in the “N” (Neutral) posi-
tion (M/T), or the selector lever in the “P”
(PARK) position (A/T), and apply the
parking brake.
2. Press the SPEECH button.
3. Say “Pair Device.”
4. The voice guide will say “Start pairing
procedure on the device. See the device
manual for instructions.” and then will
say “The pairing code is <pairing code>.”
5. Enter in the Bluetooth
®
device the 4-digit
number that has been read out in Step 4.
To pair
NOTE
 You cannot pair any Bluetooth
®
device with
the Bluetooth
®
2.0 interface unless the vehi-
cle is parked. Before pairing a Bluetooth
®
device with the Bluetooth
®
2.0 interface,
confirm that the vehicle is parked in a safe
location.
NOTE
 The following procedure ( to ) can also
be used instead of saying “Pair Device.”
Replace this step 3 with the following proce-
dure if you prefer.
Say “Setup.”
Say “Pairing Options.”
The voice guide will say “Select one of
the following: pair, edit, delete, list or set
code.”
Say “Pair.”
 If 7 devices have already been paired, the
voice guide will say “Maximum devices
paired” and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to “Selecting a device: Deleting a
device” on page 7-68.)
NOTE
 Some Bluetooth
®
devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements and read
the next section “If your device requires a
specific pairing code” on page 7-68 to set the
pairing code.
 The pairing code entered here is only used
for the Bluetooth
®
connection certification.
Depending on the connection settings of the
Bluetooth
®
device, this code may have to be
entered each time you connect the Blue-
tooth
®
device to the Bluetooth
®
2.0 inter-
face. For the default connection settings,
refer to the instructions for the device.
NOTE
 According to the corresponding device to
Bluetooth
®
, it might take a few minute to
pair the Bluetooth
®
device with the Blue-
tooth
®
2.0 interface.
 If the Bluetooth
®
2.0 interface cannot recog-
nise the Bluetooth
®
device, the voice guide
will say “Pairing has timed out” and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
®
, and try pairing it again.
NOTE
BK0240501EN.book 67 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分