Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 373 / 501

Bluetooth® 2.0 interface*
7-64 For pleasant driving
7
If the entered password is wrong, the voice
guide will say “<4-digit password>, Incorrect
password. Please try again.” Enter the correct
password.
Use the following procedure to turn off the
security function by disabling the password.
1. Press the SPEECH button.
2. Say “Setup.”
3. Say “Password.”
4. The voice guide will say “Password is
enabled. Would you like to disable it?”
Answer “Yes.”
Answer “No” to cancel the disabling of
the password and return to the main
menu.
5. When the disabling of the password is
completed, the voice guide will say “Pass-
word is disabled” and the system will
return to the main menu.
E00760501460
It is possible to use a passcode as a security
function by setting a passcode of your choice
for the Bluetooth
®
2.0 interface.
When the security function is turned on, it is
necessary to make a voice input of a 4-digit
passcode in order to use all functions of the
Bluetooth
®
2.0 interface, except for recep-
tion.
Use the following procedure to turn on the
security function by setting a passcode.
1. Press the SPEECH button.
2. Say “Setup.”
3. Say “Passcode.”
4. The voice guide will say “Passcode is dis-
abled. Would you like to enable it?”
Answer “Yes.”
Answer “No” to cancel the setting of the
passcode and return to the main menu.
5. The voice guide will say “Please say a 4-
digit passcode. Remember this passcode.
It will be required to use this system.”
Say a 4-digit number which you want to
set as a passcode.
6. For confirmation purposes, the voice
guide will say “Passcode <4-digit pass-
code>. Is this correct?” Answer “Yes.”
Answer “No” to return to the passcode
input in Step 5.
7. When the registration of the passcode is
completed, the voice guide will say “Pass-
code is enabled” and the system will
return to the main menu.
If a passcode has been set and the security
function is enabled, the voice guide will say
“Hands-free system is locked. State the pass-
NOTE
 You can re-enter the password as many times
as you want.
 If you have forgotten your password, say
“Cancel” to quit the voice input mode and
then check with an authorised MITSUBISHI
MOTORS dealer.
Disabling the password
NOTE
 System must be unlocked to disable the pass-
word.
Security function (Vehicles for
Chile and Mexico)
Setting the passcode
NOTE
 Passcode will be required to access the sys-
tem after the next ignition cycle.

It is required for a little time after engine
stop that the entered passcode is actually
recorded in the system.
If the ignition switch is made to “ACC” or
“ON” or the engine is started immediately
after engine stop, there is a case when the
entered passcode is not recorded in the sys-
tem. At this time, please try to enter the pass-
code again.
Entering the passcode
BK0240501EN.book 64 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分