Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 73 / 501

Seat belts
4-18 Seat and seat belts
4
2. Pull out the buckle (C) from the seat cush-
ion.
3. Pull the seat belt and insert the small latch
plate (A) into the buckle (C).
4. Insert the latch plate (B) into the buckle
(D).
5. Pull the belt slightly to adjust slackness as
desired.
1. Hold the latch plate and press the button
on the buckle.
2. After the seat belt is retracted completely,
insert the small latch plate (A) into holder
(F), and then insert the latch plate (B) into
the holder (F).
3. Store the seat belt buckle in the storage
pocket.
(Refer to next column.)
E00405401085
After passing the belt through the rear notch
(A), insert the plate into the front notch (B).
NOTE
 Pulling out the latch plate by force may dam-
age the headliner.
To unfasten
NOTE
 As the belt retracts automatically, keep the
latch plate held while retracting so that the
belt stows slowly. Failure to do this could
damage the vehicle and hit passengers.
 To release the buckle (C), press the button
(E) with a narrow-tipped object (latch plate
or mechanical key etc.).
Second and third (7 persons)
seat belt storage
Seat belt plate storage
Outboard seating position
BK0240501EN.book 18 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分