Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 275 / 501

Forward Collision Mitigation System (FCM)*
6-108 Starting and driving
6
If you press and hold the Forward Collision
Mitigation System (FCM) and Ultrasonic
misacceleration Mitigation System (UMS)
ON/OFF switch, you can switch the system
from OFF to ON or ON to OFF.
Once the system is turned on, the information
screen of the multi information display shows
the collision alarm timing currently selected,
and the “Forward Collision Mitigation Sys-
tem (FCM) and Ultrasonic misacceleration
Mitigation System (UMS) OFF” indicator on
the screen goes out.
When you turn off the system, the “Forward
Collision Mitigation System (FCM) and
Ultrasonic misacceleration Mitigation System
OFF” message appears on the screen and the
“Forward Collision Mitigation System
(FCM) and Ultrasonic misacceleration Miti-
gation System OFF” indicator comes on.
Even if you switch the FCM from ON to
OFF, when the operation mode becomes ON,
the FCM will be set ON.
Give a short press to the Forward Collision
Mitigation System (FCM) and Ultrasonic
misacceleration Mitigation System (UMS)
ON/OFF switch to change the timing at
which the frontal collision alarm is triggered.
Every time you press the switch, the alarm
NOTE
 When the Forward Collision Mitigation Sys-
tem (FCM) and Ultrasonic misacceleration
Mitigation System (UMS) ON/OFF switch is
held pressed to change the ON/OFF state of
the FCM, the ON/OFF state of the Ultrasonic
misacceleration Mitigation System is also
changed at the same time.
To turn on/off the system
NOTE
 The OFF indicator of the FCM and the OFF
indicator of the Ultrasonic misacceleration
Mitigation System are the same indicator.
CAUTION
 In the following conditions, even if the FCM
is ON, the FCM is automatically switched to
OFF. In this case, the warning display may
appear if you press the Forward Collision
Mitigation System (FCM) and Ultrasonic
misacceleration Mitigation System (UMS)
ON/OFF switch.
• When the drive mode-selector of Super
select 4WD II is in “4LLc” (if so equipped).
• The rear differential lock is ON (if so
equipped).
• The Hill Descent Control is ON (if so
equipped).
• The ASTC is OFF.
Example: When the drive mode-selector of
Super select 4WD II is in “4LLc”.
To change alarm timing
BK0240501EN.book 108 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分