Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 281 / 501

Blind Spot Warning (BSW)*
6-114 Starting and driving
6
E00644000052
Example: When there is a malfunction in
both sensors
When the warning display appears, the Ultra-
sonic misacceleration Mitigation System does
not operate normally because there are some
malfunctions in the system. Have the vehicle
inspected at an authorised MITSUBISHI
MOTORS dealer as soon as possible.
E00644200041
Example: When trying to set the Ultrasonic
misacceleration Mitigation System to ON by
pressing the Forward Collision Mitigation
System (FCM) and Ultrasonic misaccelera-
tion Mitigation System (UMS) ON/OFF
switch with the rear differential lock ON.
E00644300055
The Blind Spot Warning is an assistance sys-
tem that checks for the view behind your
vehicle by informing the presence of another
vehicle running diagonally behind your vehi-
cle that may be in the blind spot of the outside
rear-view mirrors. When a vehicle which is
travelling diagonally behind at approximately
the same speed as your vehicle is detected,
the Blind Spot Warning lamp located inside
the outside rear-view mirror illuminates.
(Refer to page 6-116)
In this state, when turn-signal lever is moved
to the side where the Blind Spot Warning
lamp is illuminated, the Blind Spot Warning
lamp blinks to inform the danger to the driver.
When there is a malfunction in the
system or the sensor
When the Ultrasonic misaccelera-
tion Mitigation System is not avail-
able
In the following conditions, even if the Ultra-
sonic misacceleration Mitigation System is
ON, the Ultrasonic misacceleration Mitiga-
tion System is automatically switched to
OFF. In addition, when the Ultrasonic misac-
celeration Mitigation System is OFF, the
Ultrasonic misacceleration Mitigation Sys-
tem is not switched to ON even if the For-
ward Collision Mitigation System (FCM) and
Ultrasonic misacceleration Mitigation Sys-
tem (UMS) ON/OFF switch is pressed.
• The drive mode-selector of Super select
4WD II is in “4LLc” (if so equipped).
• The rear differential lock switch is set to ON
(if so equipped).
• The Hill Descent Control is operating (if so
equipped).
• The ASTC is set to OFF by operating the
ACS OFF switch.
Blind Spot Warning (BSW)
*
WARNING
 The driver has the responsibility to drive
safely. The Blind Spot Warning is an assis-
tance system that checks for the view
behind your vehicle. Be sure to visually
confirm the environmental conditions
with your own eyes. Do not depend
entirely on the Blind Spot Warning. The
effect of the Blind Spot Warning operation
varies depending on situations and condi-
tions, such as driving conditions road con-
ditions, and steering, acceleration and
braking operations, so that the perfor-
mance the function can deliver is not
always the same.
BK0240501EN.book 114 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分