Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 178 / 501

Parking brake
Starting and driving 6-11
6
3. Stop the engine if it is running.
4. Make sure that the indicator lamp on the
Electric parking brake switch is off.
5. Remove the bolts (A) (3 locations) secur-
ing the cap (B) with a hexagon wrench
(C).
6. Remove the cap by hooking the jack han-
dle (D) to the cap.
7. Pull out the plug (E).
8. Insert the hexagon wrench into the hole
where the plug was installed, and con-
tinue to turn it anticlockwise while push-
ing it in.
WARNING
 When releasing the Electric parking brake
manually, be sure to move the selector
lever to the “P” (PARK) position. Other-
wise, the vehicle may begin to move, which
may lead to an unexpected accident.
WARNING
 Be sure to ensure that the indicator lamp
on the Electric parking brake switch is off
before releasing the Electric parking
brake manually. Otherwise, the Electric
parking brake may operate and the hexa-
gon wrench may move suddenly, which
may cause injury.
CAUTION
 When performing the release operation, use
the hexagon wrench which are on-vehicle
tools, and do not use the power tool. Other-
wise, it may cause damage to the Electric
parking brake.
BK0240501EN.book 11 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分