Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 308 / 501

Multi Around Monitor*
Starting and driving 6-141
6
E00693000021
It is possible to change the vehicle icon color
in the bird’s eye-view.
1. Stop the vehicle in a safe place.
2. Press the switch (A) to display the bird’s
eye-view/front-view.
3. Press and hold down the switch (A) until
the vehicle icon blinks to enter the selec-
tion mode of the vehicle icon color in the
bird’s eye-view.
4. Press the switch until the desired color
appears on the display.
Each time you press the switch, the vehi-
cle icon color in the bird’s eye-view will
change to the next one.
5. When it is changed to your desired color,
press and hold the switch (A) for a few
seconds. This completes the setting.
CAUTION
 The bird’s-eye view is an simulated view
processed by combining view captured by
“Front-view camera”, “Side-view cameras
(right and left)” and “Rear-view camera”.
Because of this, in the Bird’s eye-view mode,
objects will appear to be farther away than
they actually are. In addition, there are blind
spots in the vicinity of the actual vehicle
which are not displayed on the screen. You
may crash your vehicle even if there seems
to be a little distance between your vehicle
and an object, and there may be an object in
the area where there seems to be nothing. Be
sure to check the safety around the vehicle
with your own eyes.

The vehicle icon displayed in the Bird’s eye-
view mode differs from the actual vehicle in
color and size. Because of this, an object
near the vehicle may appear to be in contact
with the vehicle, and the positional relation-
ship between the vehicle and the object may
differ from the actual one.
 The view composition processing regions are
present in the four corners of the Bird’s eye-
view display, mainly at the boundary sec-
tions of views from each camera. Because of
this, in the vicinity of the boundary sections,
the sharpness of the views may decrease and
an object may disappear and reappear on the
screen.
NOTE
 In the Bird’s eye-view mode, since the views
captured by the four cameras, “Front-view
camera”, “Side-view cameras (right and
left)” and “Rear-view camera” are processed
based on a level flat road surface, an image
may be displayed as follows:
• An object appears to have fallen down and
looks longer or larger.
• An object having a height from the road
surface may seem to appear from the joint
of the view composition processing
regions.

The brightness of the views from each cam-
era may vary depending on the illuminance
conditions.
 An object above the camera is not displayed.

The object displayed in the Front-view mode
or the Rear-view mode may not be displayed
in the Bird’s eye-view mode.
 The view in the Bird’s eye-view mode may
be displaced from its true position when the
mounting location and angle of each camera
are changed.
 The lines on the road may appear to be dis-
placed or bent at the joint of the views.
To change the vehicle icon color
in the bird’s eye-view
CAUTION
 For reasons of safety, do not operate the
switch while driving.
BK0240501EN.book 141 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分