Mitsubishi MOTORS SHOGUN SPORT, Owner'S Manual

Page: 345 / 501

Listen to Traffic Messages (Type 2)
7-36 For pleasant driving
7
The top 6 stations with a strong signal can be
automatically registered in order with preset
keys.
Hold down the RADIO key.
After completion of auto store operations, the
product will receive the station registered in
the preset key [1].
Select PTY (program content), and automati-
cally scan for stations.
1. During FM reception, press the
PTY/SCAN key.
This switches to the PTY selection mode.
2. Turn the /SEL key to select PTY.
The PTY (program content) indicator will
flash, and station selection will automati-
cally start. When a station is received, the
station name is displayed.
E00739201070
This explains how to listen to traffic mes-
sages.
1. When not in MW or LW mode, press the
TP key.
If traffic messages are being broadcast,
these are received.
When the broadcast of traffic messages starts,
this automatically switches to the station that
is broadcasting traffic messages.
NOTE
 Separate to normal reception preset keys,
this registers in preset keys in the AUTO-P
mode.

Pressing the preset key will select the previ-
ously registered frequency.
 Each time the AUTO-P key is pressed, this
switches between normal reception and
AUTO-P mode.

In the AUTO-P mode, manual/seek station
selection, as well as scan operation is also
possible.
Auto Memory (Auto Store)
(Type 2)
CAUTION
 Please be aware that the formerly-registered
frequency in the memory will be overwrit-
ten.
NOTE
 Using auto store for FM1 and FM2 switches
to FM3.
PTY Search (Type 2)
NOTE
 This receives the station detected first.
 10 seconds after reception, PTY search mode
will be cancelled.
Listen to Traffic Messages
(Type 2)
To Listen to Traffic Messages
CAUTION
 When receiving a MW or LW signal, traffic
messages cannot be received.
NOTE
 Receiving traffic messages will indicate
“TRAF INF” on the display, and if text infor-
mation can be received, the station name is
displayed.
 If traffic messages are received, then this
will switch to the volume of the previously
received traffic messages or emergency
broadcasts. The volume when receiving traf-
fic messages or emergency broadcasts is that
at which subsequent broadcasts will be
received.
Traffic Message Standby Mode
BK0240501EN.book 36 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分