Mitsubishi Electric CAHV-P500YA-HPB, Service Handbook

Page: 72 / 160

[
VII
Control ]
- 65 -
HWE10060 GB
Priority order of the water-temperature-setting-input-signal sources
Water temperature can be controlled by using the signals from the four types of input sources listed below. The
setting for the item with higher priority will override the settings for the items with lower priorities. The water
temperature will be controlled according to the temperature setting in the "Target water temperature" column that
corresponds to a specific combination of the settings for the four items.
*1 If SW2-8 is set to OFF, water temperature will be controlled by the built-in thermistors TH10 and TH13 on the unit.
4 y t i r o i r P 3 y t i r o i r P 2 y t i r o i r P 1 y t i r o i r P
Target water
temperature
Sensor that
becomes active
(when SW2-8
is set to ON)(*1)
Analog input
Main board
on the unit
Dry contact input
Remote controller
PAR-W21MAA
Schedule
setting
Mode
Change 1
Mode
Change 2
No remote
controller
Manual
setting
Schedule
setting
SW2-7: ON Ineffective Ineffective Ineffective - Ineffective Ineffective
Temperature setting
for the analog signal
input
TH14
SW2-7: OFF
When
schedule has
been set
Ineffective Ineffective - Ineffective Ineffective
Selectable from
temperature settings
A through C
Selectable from
TH14 or TH15
When no
schedule has
been set
ON
(Heating Eco)
ON
(Hot water)
- Ineffective Ineffective
Temperature setting B
(Hot water mode)
Selectable from
TH14 or TH15
ON
(Heating Eco)
OFF
(Heating)
- Ineffective Ineffective
Temperature setting C
(Heating Eco mode)
Selectable from
TH14 or TH15
OFF
(Heating)
ON
(Hot water)
- Ineffective Ineffective
Temperature setting B
(Hot water mode)
Selectable from
TH14 or TH15
OFF
(Heating)
OFF
(Heating)
When no RC
is used
- -
Temperature setting A
(Heating mode)
Selectable from
TH14 or TH15
-
Hot water
mode
-
Temperature setting B
(Hot water mode)
Selectable from
TH14 or TH15
-
Heating ECO
mode
-
Temperature setting C
(Heating Eco mode)
Selectable from
TH14 or TH15
- Heating -
Temperature setting A
(Heating mode)
Selectable from
TH14 or TH15
- -
When
schedule has
been set
Target water temp is
controlled according
to the setting on the
remote controller.
TH14