Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
4-5
The network administrator chooses which of these parameters (if any) are supplied to the IP
phone by the DHCP server. The administrator must configure the phone manually to provide
any required network parameters not supplied by the DHCP server.
Enabling/Disabling DHCP Using the Configuration Files
Use the following procedure to enable/disable DHCP on the phone using the configuration files.
For specific parameters you can set in the configuration files, see Appendix A, the section,
Enabling/Disabling DHCP Using the IP Phone UI
Use the following procedure to enable/disable DHCP on the phone using the IP Phone UI.
For the 6863i/6865i:
1.
Press
on the phone to enter the Options List.
2.
Select
Administrator Menu.
3.
Enter your Administrator password.
4.
Select
Network
Settings
.
5.
Select option
DHCP
.
6.
Press
Change
to set "
Use DHCP?
" to "Yes" (enable) or "No" (disable).
7.
Press
Done
to save the changes.
For the 6867i/6869i:
1.
Press
on the phone to enter the Options List.
2.
Press the
Advanced
softkey.
3.
Enter the Administrator password using the keypad. Default is “
22222
”.
4.
Select
Network > Settings
.
5.
In the “
Use DHCP?
” checkbox, press the
button to enable or disable DHCP.
6.
Press the
Save
softkey.
7.
Press the
button, the
button, or the
Quit
softkey to return to the idle screen.
For the 6873i:
1.
Press
on the phone to enter the Options List.
CONFIGURATION FILES
IP PHONE UI
Note:
The IP Phones accept numeric passwords only.
Summary of Contents for 6800 Series
