Mitel 6800 Series, Administrator'S Manual, Page: 851 / 1113

Operational, Basic, and Advanced Parameters
A-109
PARAMETER –
sips local certificate
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Allows you to specify the Local Certificate file to use when the phone
uses the TLS transport protocol to setup a call.
This parameter is required when configuring TLS (optional for
Persistent TLS.)
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A
FILENAME at the end of the string. For example:
sips local certificate:ftp://admin:admin!@1.2.3.4:50/path/
phonesLocalCert.pem
where “path” is the directory and “phonesLocalCert.pem” is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
Note:
The certificate file must use the format “.pem”. To create
specific certificate files to use on your IP phone, contact Mitel
Technical Support.
FORMAT
<filename>.pem
DEFAULT VALUE
N/A
RANGE
N/A
EXAMPLE
The following example downloads no local certificate file:
sips local certificate:
The following example downloads the local certificate file from the
original configuration server.
sips local certificate: phonesLocalCert.pem
The following example uses FTP to download the firmware file
“phonesLocalCert.pem” (local certificate file) from the “path”
directory on server 1.2.3.4 using port 50:
sips local certificate:
ftp://admin:admin!@1.2.3.4:50/path/phonesLocalCert.pem