Mitel 6800 Series, Administrator'S Manual, Page: 335 / 1113

Operational Features
5-72
For specific parameters you can set in the configuration files, see Appendix A, the section,
“SIP
Local Dial Plan Settings”
on
page A-69
.
1.
Click on
Basic Settings-> Preferences->General.
2.
In the "
Local Dial Plan
" field, enter a valid local dial plan (up to 512 alphanumeric charac-
ters) for the IP phone. Default is X+#|XX+*. Enter prepended digits or a “;”to present a
secondary dial tone if required.
3.
Enable the "
Send Dial Plan Terminator
" field by checking the check box. (Disable this
field by unchecking the box). Default is disabled.
4.
In the "
Digit Timeout (in seconds)
" field, enter a timeout value. This is the length of time,
in seconds, he phone waits before dialing. Default is 4 seconds.
5.
Click
Save Settings
to save your changes.
CONFIGURATION FILES
MITEL WEB UI
Note:
If a User enters a dial plan longer than 512 characters, or a parsing error occurs, the
phone uses the default dial plan of “x+#|xx+*”.