Mitel 6800 Series Administrator'S Manual Download Page 365

Page: 365 / 1113

Operational Features

5-102

Press

to enter the Options List.

Press the

Advanced

softkey.

Enter the Administrator password and press the blue Enter key. Default is “

22222

”.

Press the

Network

icon.

Press the

LLDP

icon.

This option enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) on the IP Phone.

Choose

Enabled

Disabled

Press the

Save

softkey.

Use the following procedure to configure LLDP-MED using the Mitel Web UI:

Click on

Advanced Settings->Network->Advanced Network Settings.

The “

LLDP

” field is enabled by default. To disable LLDP, click the check mark in the box

to clear the check mark.

In the “

LLDP Packet Interval

” field, enter the time, in seconds, between the transmission

of LLDP Data Unit (LLDPDU) packets.
The value of zero (0) disables this parameter. Valid values are 0 to 2147483647. Default
is 30.

Click

Save Settings

to save your changes.

Note:

If required, swipe left on the screen to navigate to the second page of options.

Note:

If required, swipe left on the screen to navigate to the second page of options.

MITEL WEB UI

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6800 Series

Reviews:

Mitel 6800 Series, Administrator'S Manual, Page: 365 / 1113

Search results

Summary of Contents for 6800 Series

Reviews: