manualshive.com logo in svg

Mitel 6800 Series, Administrator'S Manual, Page: 210 / 1113

Share
Download
Mitel 6800 Series Administrator'S Manual Download Page 210

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

4-57

Configuring Rport Using the Mitel Web UI

Use the following procedure to configure Rport on your phone using the Mitel Web UI.

1.

Click on 

Advanced Settings->Network->Advanced Network Settings

.

2.

In the "Advanced Network Settings" section, enable the "

Rport (RFC3581

" field by checking 

the check box. (Disable Rport by unchecking the box).
“Rport” in RFC 3581, allows a client to request that the server send the response back to 
the source IP address 

and

 the port from which the request came.

3.

Click 

Save Settings

 to save your changes.

NETWORK TIME SERVERS

Network Time Protocol (NTP) is a protocol that the IP phone uses to synchronize the phone 
clock time with a computer (configuration server) in the network.

To use NTP, you must enable it using the configuration files or the Mitel Web UI. You can specify 
up to three time servers in your network.

 MITEL WEB UI

Notes: 

1.

The IP phones support NTP version 3.

2.

NTP time syncs are performed every 4 hours.

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments