Mitel 6800 Series, Administrator'S Manual, Page: 403 / 1113

Operational Features
5-140
MICLOUD TELEPO DIRECTED CALL PICKUP SUPPORT
Improvements have been made with regards to the directed call pickup feature specifically for
interoperability with the MiCloud Telepo for Service Providers call manager.
For MiCloud Telepo interoperability, the directed call pickup feature must be enabled (i.e. the
"
directed call pickup
" parameter must be defined as "
1
") and the "
enhanced directed call
pickup
" parameter must be defined as "
3
".
In this enhanced directed call pickup mode, pressing a BLF key when the monitored extension
is ringing will cause the phone use the dialog information sent in the NOTIFY message to form
the INVITE request (the dialog information will be detailed in the "Replaces" header of the
INVITE).
Enabling MiCloud Telepo Directed Call Pickup Support
Use the following procedure to enable MiCloud Telepo directed call pickup support in the
configuration files.
To enable MiCloud Telepo directed call pickup support using the configuration files, see
Appendix A, the section,
“Directed Call Pickup (BLF or XML Call Interception) Settings”
on
page A-214
.
SOFTKEYS/PROGRAMMABLE KEYS/EXPANSION MODULE KEYS
You can configure the softkeys, programmable keys, and expansion module keys that are
applicable to a specific phone model, to perform specific functions on the IP phones.
CONFIGURATION FILES
Notes:
1.
When entering definitions for softkeys in the configuration files, the “#” sign must be
enclosed in quotes.
2.
Use "topsoftkeyN" when defining top softkey parameters and "softkeyN" when
defining bottom softkey parameters.