manualshive.com logo in svg

Mitel 6800 Series, Administrator'S Manual, Page: 248 / 1113

Share
Download
Mitel 6800 Series Administrator'S Manual Download Page 248

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

4-95

1.

Click on 

Advanced Settings->Global SIP->RTP Settings.

Global Settings

:

2.

Click on 

Advanced Settings->Line <N>->RTP Settings.

Per-Line Settings:

3.

Enter an RTP Port Base in the 

RTP Port

 field. Default is 

3000

.

|The RTP Port indicates the port through which the RTP packets are sent. This value must 
specify the beginning of the RTP port range on the gateway or router. The RTP port is used 
for sending DTMF tones and for the audio stream. Your network administrator may close 
some ports for security reasons. You may want to use this parameter to send RTP data 
using a different port.

4.

The "

Force RFC2833 Out-of-Band DTMF

" field is enabled by default. Disable this field 

by unchecking the box. 
Enabling this parameter forces the IP phone to use out-of-band DTMF according to
RFC2833.

 MITEL WEB UI

Note: 

The phones support decoding and playing out DTMF tones sent in SIP INFO 

requests. The following DTMF tones are supported:

• Support signals 0-9, #, *

• Support durations up to 5 seconds

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments