manualshive.com logo in svg

Mitel 6800 Series, Administrator'S Manual, Page: 850 / 1113

Share
Download
Mitel 6800 Series Administrator'S Manual Download Page 850

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

A-108

PARAMETER –

 

sips root and intermediate
certificates

CONFIGURATION FILES

startup.cfg, <model>.cfg, <mac>.cfg

DESCRIPTION

Allows you to specify the SIP Root and Intermediate Certificate files 
to use when the phone uses the TLS transport protocol to setup a 
call.
The Root and Intermediate Certificate files contain one root 
certificate and zero or more intermediate certificates which must be 
placed in order of certificate signing with root certificate being the first 
in the file. If the local certificate is signed by some well known 
certificate authority, then that authority provides the user with the 
Root and Intermediate Certificate files (most likely just CA root 
certificate).
This parameter is required when configuring TLS (optional for 
Persistent TLS.)
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A 
FILENAME at the end of the string. For example:
sips root and intermediate certificates: 
ftp://admin:[email protected]:50/path/phonesRootCert.pem
where “path” is the directory and “phonesRootCert.pem” is the 
filename. If you do not specify a filename, the download fails.
See examples for each below.

Note: 

The certificate files must use the format “.pem”. To create 

custom certificate files to use on your IP phone, contact Mitel 
Technical Support.

FORMAT

<filename>.pem

DEFAULT VALUE

N/A

RANGE

N/A

EXAMPLE

The following example downloads no root and intermediate 
certificate file:
sips root and intermediate certificates:
The following example downloads the root and intermediate 
certificate file from the original configuration server.
sips root and intermediate certificates: phonesRootCert.pem
The following example uses FTP to download the firmware file 
“phonesRootCert.pem” (root and intermediate certificate file) from 
the “path” directory on server 1.2.3.4 using port 50.
sips root and intermediate certificates: 
ftp://admin:[email protected]:50/path/phonesRootCert.pem

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments