Mitel 6800 Series, Administrator'S Manual, Page: 484 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-221
In the Mitel Web UI, you use the following fields at
Basic Settings -> Preferences
to configure
park/pickup statically:
• Park Call
• Pick Up Parked Call
How it Displays on the Phone
On the phone UI, the static configuration method displays the following:
• When a call comes in and you pickup the handset, the default label of “Park” displays on
the first screen of the phone UI.
• After pressing the “Park” softkey to park the call, the default label of “Pickup” displays on
the first screen of the phone UI.
The values you enter for the Park/Pickup feature are dependent on your type of server. The
following table provides the values you enter for the “
sprecode”
and “
pickupsprecode”
parameters (configuration files), or "
Park Call
" and "
Pickup Parked Call
" fields (Mitel Web UI).
Park/Pickup Call Server Configuration Values
**Leave "value" fields blank to disable the park and pickup feature.
Configuring Park/Pickup Static Configuration Using the Configuration Files
Use the following parameters to configure park/pickup static configuration:
• sprecode
• pickupsprecode
For specific parameters you can set in the configuration files, see Appendix A, the section, “Park
and Pickup Settings” on
page A-219
.
Note:
A "Drop" softkey is also offered when the "Park" softkey is pressed. Pressing
the "Drop" softkey will cancel the park attempt and return the user to the original call.
SERVER PARK VALUES** PICKUP VALUES**
Asterisk 70 70
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup
CONFIGURATION FILES