Mitel 6800 Series, Administrator'S Manual, Page: 968 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-226
PARAMETER –
softkeyN value
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
This is the value you assign to the softkey.
The “
softkeyN value
” parameter can be set for the following softkey
types only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the speeddial value
to allow the phone to dial the prefix after you press the
Speeddial key; you then enter the rest of the number from the
keypad on the phone).
• spre
• xml
• park
• pickup
• speeddialxfer
• speeddialconf
• redial
• filter
• icom
• paging
• callcenter
• For speeddial the value is the phone number, extension, or prefix
number to enter for the softkey.
• For blf the value is the extension you want to monitor.
• For spre the value is dependent on services offered by server.
• For park and pickup valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page 5-226 .
• For xml you can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$$
• For icom, the value is the predefined intercom call number.
• For paging the value is the ip and port (the port range is from 1 to
65535).
• For callcenter, the value for the key must be identical to the call
center ID value configured for the specific user in the BroadSoft
BroadWorks call manager software.