Mitel 6800 Series Administrator'S Manual Download Page 247

Page: 247 / 1113

Global SIP Settings

4-94

Select

SIP Settings.

Select

RTP Port Base

to change the RTP port base setting. Default is

3000

Press

Done

(2 times) to save the change.

Select

Restart.

For the 6867i/6869i:

Press

on the phone to enter the Options List.

Press the

Advanced

softkey.

Enter the Administrator password using the keypad. Default is “

22222

”.

Select

SIP > Call Server

In the

RTP Port Base

field, enter an RTP port base setting. Default is

3000

Press the

Save

softkey.

Restart the phone for the change to take affect.

For the 6873i:

Press

on the phone to enter the Options List.

Press the

Advanced

softkey.

Enter the Administrator password and press the blue Enter key. Default is “

22222

”.

Press the

SIP

icon.

Press the

Call Server

icon.

In the

RTP Port Base

field, enter an RTP port base setting. Default is

3000

Press the

Save

softkey.

Restart the phone for the change to take affect.

Note:

The session prompts you to restart the IP phone to apply the configuration

settings

Note:

If required, swipe left on the screen to navigate to the second page of options.

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6800 Series

Reviews:

Mitel 6800 Series, Administrator'S Manual, Page: 247 / 1113

Search results

Summary of Contents for 6800 Series

Reviews: