manualshive.com logo in svg

Mitel 6800 Series, Administrator'S Manual

Share
Download
Mitel 6800 Series Administrator'S Manual Download Page 281

Operational Features

5-18

If the number that was dialed was 456-2345, the phone tries to match the number to the dial 
plan before sending out the SIP packet but as it is not part of the dial plan the phone identifies 
the number as a PSTN number. The SIP packet header in this case indicates user=phone (i.e. 
“To: <sip:4562345:10060;user=phone>“).

USER DIAL PLAN AND PREFIX DIALING

The IP phones also support a prefix dialing feature for outgoing user dial plan numbers. If the 
dialed number matches against the user dial plan, the phone automatically maps the 
pre-configured prepended digit in the configuration to the beginning of the dialed number. 

You can enable this feature by adding prepend digits to the end of the user dial plan parameter 
string separated by a comma in the configuration files. For example, if you specify the user dial 
plan with a prepend map of “6xx,9”, if the user dials the number "645", the SIP phone will 
automatically add the digit “9” before the "645".

Configuring the SIP User Parameter Dial Plan

Use the following procedure to configure the SIP user parameter dial plan.

For the specific parameter you can set in the configuration files, see Appendix A, the section, 

“User Dial Plan Setting”

 on 

page A-19

.

TIME AND DATE

In addition to enabling/disabling the time server, you can also set the time and date format, set 
the time zone, and set daylight savings time on the IP phones. You configure these features 
using the configuration files, the IP Phone UI, or the Mitel Web UI. The following table identifies 
which method of configuration applies to each feature.

Notes: 

1.

Entering a dial plan value for this parameter enables this feature. Entering no value 

for this parameter in the configuration files, disables this feature.

2.

You can configure the “

sip user parameter dial plan

” parameter on a global basis 

only. If it is misconfigured, then the parameter is ignored.

Note: 

Patterns/numbers in the dial plan with prepend digits defined take priority over 

those that do not have prepend digits defined.

 CONFIGURATION FILES

FEATURE

METHOD OF CONFIGURATION

Set Time Format

Configuration Files
IP Phone UI
Mitel Web UI

Set Date Format

Configuration Files
IP Phone UI
Mitel Web UI

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands