manualshive.com logo in svg

Mitel 6800 Series, Administrator'S Manual

Share
Download
Mitel 6800 Series Administrator'S Manual Download Page 586

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

5-323

AUTHENTICATION SUPPORT FOR HTTP/HTTPS DOWNLOAD METH-
ODS, USED WITH BROADSOFT CLIENT MANAGEMENT SYSTEM 
(CMS)

The IP phones support HTTP/HTTPS digest authentication as defined in RFC 2617. (The HTTP 
client supports digest authentication; the HTTP server does not; the HTTP server supports 
basic authentication). This feature allows the phones to interoperate with BroadSoft’s CMS 
phone configuration tool.

Using the configuration files, you can enable/disable the following parameter to display a LOG 
IN softkey which allows the HTTP/HTTPS server to perform digest authentication:

•

http digest force login - specifies whether or not to display the LOG IN softkey on the IP 
Phone UI screen. Valid values are 0 (disabled) or 1 (enabled). Default is 0 (disabled).

If the “

http digest force login

” parameter is set to 

1

 (enabled), after the phone boots, the LOG 

IN softkey displays on the phone’s LCD. If the user presses this softkey, a username/password 
screen displays, allowing the user to enter the configured username and password that is sent 
to the HTTP/HTTPS server for digest authentication by the server. By default, username is 
“

aastra

” and password is “

aastra

”. You can enter the username and password in two ways:

•

Using the configuration files, you can change the default values for the following parameters:

•

http digest username - 

specifies the username to use for HTTP/HTTPS digest 

authentication.

•

http digest password

 - specifies the password to use for HTTP/HTTPS digest 

authentication.

•

By enabling the “

http digest force login

” parameter (setting to 1) - the phone displays the 

LOG IN key so the user can enter the default username/password via the IP Phone UI.

CONFIGURING BROADSOFT CMS SUPPORT VIA THE CONFIGURATION 
FILES

Configure BroadSoft CMS support on the IP Phone using the following parameters in the 
configuration files:

•

http digest force login

•

http digest username

•

http digest password

For specific parameters you can set in the configuration files, see Appendix A, the section, 

“HTTP/HTTPS Authentication Support for BroadSoft CMS”

 on 

page A-96

.

USING THE IP PHONE WHEN BROADSOFT CMS IS ENABLED

If you enable the HTTP/HTTPS digest authentication feature, the phone behaves as follows 
with the BroadSoft CMS tool:

 CONFIGURATION FILES

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands