Mitel 6800 Series, Administrator'S Manual, Page: 910 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-168
PARAMETER –
action uri registered
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the URI for which the phone executes a GET on when a
successful registration event occurs. This parameter can use the
following variables:
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
$$LINESTATE$$
$$LOCALIP$$
Note:
The “
action uri registered
” parameter executes on the first
successful registration of each unique line configured on the phone.
FORMAT
Fully qualified URI
DEFAULT VALUE
N/A
RANGE
Up to 128 ASCII characters
EXAMPLE
action uri registered: http://10.50.10.14/registered.php?auth
name=$$SIPAUTHNAME$$
PARAMETER –
action uri registration event
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the URI that the phone executes a GET on, when a
registration event change occurs. This parameter uses the following
variables to determine the state of the event:
$$REGISTRATIONSTATE$$
$$REGISTRATIONCODE$$
Note:
If defined, this action URI is also called upon at startup if the
SIP registrar IP has not been configured (i.e. the IP is 0.0.0.0).
Note:
This action URI is not called when the same event is repeated
(for example, a timeout occurs again when registration is already in
a timeout state.)
FORMAT
String
DEFAULT VALUE
N/A
RANGE
Any valid URI
EXAMPLE
action uri registration event:
http://10.30.100.39/PHPtests/actionuri.php?action=RegEvt&regstat
e=$$REGISTRATIONSTATE$$&regcode=$$REGISTRATIONCOD
E$$