Mitel 6800 Series, Administrator'S Manual

Page: 921 / 1113

Operational, Basic, and Advanced Parameters
A-179
NO SERVICE CONGESTION TONE SETTINGS
STATUS CODE ON IGNORING INCOMING CALLS
SWITCH FOCUS TO RINGING LINE
PARAMETER –
no service congestion tone
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
If enabled, the congestion tone will replace the conventional dial tone
when the handset is off hook, a headset is employed, or the
speakerphone is engaged. The congestion tone is played on a per
line basis whereby only the specific lines that are without service are
affected.
FORMAT
Boolean
DEFAULT VALUE
0 (disabled)
RANGE
0-1
0 (disabled)
1 (enabled)
EXAMPLE
no service congestion tone: 1
PARAMETER –
sip ignore status code
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the status code that is sent in the response to the server
when a user ignores an incoming call.
FORMAT
Integer
DEFAULT VALUE
486
RANGE
Valid SIP final negative response code (Refer to RFC3261)
EXAMPLE
sip ignore status code: 486
PARAMETER –
switch focus to ringing line
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies whether or not the UI focus is switched to a ringing line
while the phone is in the connected state.
FORMAT
Boolean
DEFAULT VALUE
1 (enable)
RANGE
0 (disable)
1 (enable)
EXAMPLE
switch focus to ringing line: 1