Mitel 6800 Series, Administrator'S Manual, Page: 283 / 1113

Operational Features
5-20
The following table identifies the additional time zone and DST parameters you can enter in
the configuration files.
CUSTOM
CONFIGURATION
FILE PARAMETER
DESCRIPTION EXAMPLE
time zone minutes The number of minutes the time zone is
offset from UTC (Coordinated Universal
Time). This can be positive (West of the
Prime Meridian) or negative (East of the
Prime Meridian). The default is Eastern
Standard Time (EST) with a value of 300
(GMT minus 5 hours). time zone minutes: 300
Note:
For additional values for
this parameter, see “Custom
Time Zone and DST Settings”
on page A-53.
dst minutes The number of minutes to add during
Daylight Saving Time. Valid values are a
positive integer between 0 to 60. dst minutes: 60
dst start relative date
dst end relative date Specifies how to interpret the start and
end day, month, and week parameters -
absolute (0) or relative (1). dst start relative date: 1
dst end relative date: 1
ABSOLUTE TIME (NOT APPLICABLE TO EASTERN STANDARD TIME (EST))
dst start month The month that DST starts. Valid values
are 1 to 12 (January to December). dst start month: 3
dst end month The month that DST ends. Valid values
are 1 to 12 (January to December). dst end month: 4
dst [start |end] week Not applicable to absolute time. N/A
dst start day The day of the month that DST starts.
Valid values are 1 to 31. dst start day: 15
dst end day The day of the month that DST ends.
Valid values are 1 to 31. dst end day: 31
dst start hour The hour that DST starts. Valid values
are an integer from 0 (midnight) to 23. dst start hour: 5
dst end hour The hour that DST ends. Valid values
are an integer from 0 (midnight) to 23. dst end hour: 23
RELATIVE TIME
dst start month The month that DST starts. Valid values
are 1 to 12 (January to December). dst start month: 4
dst end month The month that DST ends. Valid values
are 1 to 12 (January to December). dst end month: 5