background image

Operational Features

5-232

You can enable/disable CFWD and set a CFWD key using the configuration files or the Mitel 
Web UI. You can set CFWD mode (

Account

Phone

Custom

) using the configuration files, 

Mitel Web UI or IP Phone UI.

CONFIGURING CALL FORWARDING

You use the following parameters to set CFWD on the IP Phone using the configuration files:

call forward key mode

softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type

softkeyN states 

(optional)

Use the following procedures to configure Call Forwarding on the IP phones.

For specific call forwarding parameters you can set in the configuration files, see Appendix A, 
the sections, 

“Call Forward Settings”

 on 

page A-159

.

“Call Forward Key Mode Settings”

 on 

page A-160

.

“Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters”

 on 

page A-221

.

1.

Click on 

Operation->Softkeys and XML

;

or

Click on 

Operation->Programmable Keys;

Notes: 

1.

In the configuration files, the “

call forward key mode

” parameter in the section, 

“Configuring Call Forwarding”

 on 

page 5-232

 is in addition to the previous call 

forward parameter (

call forward disabled

). You can still use the previous call 

forwarding parameter if desired in the configuration files.

2.

In the IP Phone UI, you can access the Call Forwarding features at the path 

Options->Call Forward

 or by pressing a configured CFWD key.

3.

If you make changes to the configuration for CFWD via the IP Phone UI, you must 

refresh the Mitel Web UI screen to see the changes.

Notes: 

1.

If there is no CFWD key configured on the phone or it is removed, you can still set 

the CFWD modes via the IP Phone UI at the path 

Options->Call Forward

.

2.

If there is only one account configured on the phone, then the mode setting is ignored 

and the phone behaves as if the mode was set to “Phone”.

3.

When configuring a CFWD mode (

All

Busy

No Answer

) for an account, you must 

configure a CFWD number for that mode in order for the mode to be enabled.

 CONFIGURATION FILES

 MITEL WEB UI

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: