Mitel 6800 Series, Administrator'S Manual, Page: 985 / 1113

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
A-243
PARAMETER –
topsoftkeyN value
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
This is the value you assign to the softkey.
The “
topsoftkeyN value
” parameter can be set for the following
softkey types only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the speeddial value to
allow the phone to dial the prefix after you press the Speeddial
key; you then enter the rest of the number from the keypad on the
phone).
• line
• blf
• spre
• xml
• park
• pickup
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• paging
• icom
• filter
• callcenter
Notes:
• For speeddial the value is the phone number, extension, or prefix
number to enter for the softkey.
• For line the value is optional; for example L4.
• For blf the value is the extension you want to monitor.
• For list the value is the target’s resource URI and (optional)
extension number. Only use for manual placement of BLF/List
keys.
• For spre the value is dependent on services offered by server.
• For park and pickup valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page 5-226 .