Mitel 6800 Series, Administrator'S Manual, Page: 364 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-101
CONFIGURING LLDP-MED AND ELIN
Use the following procedures to configure LLDP-MED and ELIN on the IP phones.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“LLDP-MED and ELIN Settings”
on
page A-162
.
Use the following procedure to enable/disable LLDP-MED using the IP Phone UI.
For the 6863i/6865i:
1.
Press on the phone to enter the Options List.
2.
Select
Administrator Menu.
3.
Select
Network Settings
.
4.
Select
Ethernet & VLAN
.
5.
Select
LLDP Support
.
6.
Press
CHANGE
to toggle the LLDP setting to
Enabled
or
Disabled
.
This field enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) on the IP Phone.
7.
Press
DONE
to save the change.
For the 6867i/6869i:
1.
Press to enter the Options List.
2.
Press the
Advanced
softkey.
3.
Enter the Administrator password using the keypad. Default is “
22222
”.
4.
Select
Network > LLDP
.
This option enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) on the IP Phone.
5.
Use the
5
and
2
keys enable or disable the feature.
6.
Press the
Save
softkey.
For the 6873i:
LLDP Packet Interval Mitel Web UI Administrator
CONFIGURATION FILES
Note:
You cannot configure the “
LLDP Interval
” or the “
Use LLDP ELIN
” parameters
via the IP Phone UI.
IP PHONE UI
PARAMETER METHOD OF CONFIGURATION WHO CAN CONFIGURE